Adding A Program To A Favourites List; Deleting A Program; Removing (Deleting) From The Favourites List - TechniSat DigiCorder K2 Operating Manual

49773_DigiCorder_K2_EN.qxd
new or all English language programs. Programmes that were already in the favouri-
tes lists are identified by the program position number from the respective favourites
list.

9.1.4 Adding a program to a favourites list

A program can be imported from the complete list into a favourites list by calling, as descri-
bed in Section 9.1.1,program list management, and, if necessary, by selecting the favourites
list that you want and then change to the full list.
> Press the blue Function control key.
A selection window will open displaying the available functions.
> Select the Add line using the arrow keys up/down.
> Press OK to confirm.
> Use the arrow keys to highlight the program that you want to add to the list.
> Press the yellow Add control key to import the highlighted program into the favouri-
tes lsit.
Selecting blocks
Proceed as follows to highlight several programs simultaneously:
> Press the OK key to jump to select mode.
The highlighted program is marked by a cross on its left.
> Using the up/down arrow keys enables you to select the following/previous pro-
grams as well.
> Highlight the programs you want in this way and then press the yellow Add control
key to save the selected programs in the favourites list.

9.1.5 Deleting a program

9.1.5.1 Removing (deleting) from the favourites list

If you want to delete a program from a favourites list, call program list management as des-
cribed in Section 9.1.1 and select the favourites list that you want.
> Press the blue Function control key.
A selection window displaying the available functions will be displayed.
> Select the the Remove line using the up/down arrow keys.
> Press OK to confirm.
> Use the arrow keys to highlight the program that you want to remove from the list.
> Press the yellow Remove control key.A "Delete program from the list?" query will
be displayed.
> Use the left/right arrow keys to highlight Yes or No.
> Press OK to confirm.
> Several programs can be deleted simultaneously by highlighting them as described in
Section 9.1.4 (Block marking) and then presssing the yellow Delete control key.
A "Delete program from the list?" query will be displayed.
> Use the left/right arrow keys to highlight Yes or No.
1.11.2007 14:57 Str. 54
54