Table of Contents
Advertisement
language/video text page.
>
Confirm by pressing OK. The sub-titles will now be
displayed.
Please note that these functions are only available when sub-
titles are actually being broadcast. This setting is not stored
in memory when programmes are switched.
7.14 Electronic Programme Guide SFI
(SiehFern Info)
Your digital receiver is equipped with an electronic program-
me guide. This allows you to access the programme informa-
tion of one or more programmes and view them on screen.
You can very quickly obtain an overview of the programmes
currently available, the programmes of the day, or the pro-
grammes of the following days.
The SFI functions allow you to:
-
display information on porogramme contents on
screen
-
mark selected programmes which will be switched on
automatically at the starting time
-
programme timers
-
search for programmes according to type (genre), and
to select them for viewing.
7.14.1 Downloading SFI data
The programme information is updated at the time set on
your receiver in accordance with Point 8.2 (SFI channel. This
can only take place when your unit is in standby mode.
The downloading procedure is indicated by the message
Load SFI in the display. If your receiver is in operating mode
at this time, the download function will not be carried out.
You may also start the download procedure manually. First
switch off the receiver (display shows "Standby), then press
the SFI key. During the download procedure, the display will
show Load SFI, followed by an indicator of the SFI data
downloaded so far (e.g. 38%).
The duration of the download procedure depends on the
number of programmes available. Programmes can be
shown for up to seven days in advance. However, because of
the volume of data, this period is reduced the more porgram-
mes are included in the electronic programme guide.
You can decide for yourself, which programmes should be
included in the electronic programme guide. These can be
included as described under Point 8.1.5.
7.14.2 Interrupting download procedure
You can interrupt the download procedure by switching on
the digital receiver (On/Standby key). The data from the pre-
vious SFI update will continue to be available.
7.14.3 Accessing electronic programme guide
>
Switch on both the digital receiver and your television
set.
25
Advertisement
Table of Contents
