Print Parameter List; Factory Test Functions; Function List; Led Test - Muratec F-360 Field Engineering Manual

3.11 Print Parameter list

This function instructs the unit to print a list of the Machine parameter, Memory switch and Unique switch
settings. The list shows the default and current settings for each.
To print the parameter lists, press MENU, *, 1, 0, ENTER.

3.12 Factory Test Functions

The factory functions provide the following machine test modes:
1. Press MENU, *, 1, 1.
2. To select the desired test mode using cursor key, then press ENTER.

3.12.1 Function List

Press MENU, *, 1, 1. Then select "Factory Function List", then press ENTER.
A list of the Factory Functions will print.

3.12.2 LED Test

1. Press MENU, *, 1, 1. Select "LED Test", then press ENTER.
2. Pressing MENU, toggle between all LEDs turn on and off.
3. Press STOP to exit the test mode.
3-109