Table of Contents
Advertisement
Optional Equipment
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 27). Remove the logs and coals (if installed - page 28)
2
Remove the burner (see illustration below).
Lift up on the left side of the
burner, then slide the burner
to the left and up to remove.
The pin on the bottom
of the burner inserts
into this hole.
Burner Replacement:
Make sure the pin on the bottom of the burner inserts
Travis Industries
The mixing tube slides onto
the orifice.
(for qualified installers only)
Before replacing the burner,
slide the air control all the
way to the right.
4030612
4 3
1 0 0 - 0 1 1 4 3
Advertisement
Table of Contents
