Transmitting data
5.7.6
Digital Signature (E-Mail)
This parameter appears when "ON" is selected for "S/MIME Communication Settings" (in [E-Mail Settings] in
the Network Settings screen in Administrator mode.
%
Specify whether or not to add a digital signature to E-Mail messages for transmission.
!
Detail
This parameter may not be available or may be set to normally sign, depending on the specified S/MIME
communication settings.
Note
For details on the S/MIME communication settings, refer to the User manual – Network Administrator.
5.7.7
Fax Header Settings (G3/IP/I-FAX)
%
Select the sender information that is attached when sending a message. Select one from the list of
sender names.
In the initial state, the sender name set as default setting is added.
!
Detail
Use "TTI Setting" in "Administrator Settings"to register the detail added to the original as sender
information. For details, refer to "Fax Settings - Header Information" on page 10-19.
Use "TTI/RTI" in "Administrator Settings" to register how to add sender information. For details, refer
to "Fax Settings - Header/Footer Position" on page 10-20.
bizhub 501/421/361 (Version 2)
5
5-81