To Begin Operation; Required Environment And Equipment; Network Connection And Settings; Network Connection - Konica Minolta bizhub 501 Network Operating Instructions

Registration of basic information
4 Registration of basic information
4.1

To begin operation

When starting operation of the product for the first time, register the following.
4.1.1

Required environment and equipment

The following table shows environment and equipment required to enable respective functions.
Description
Network scan function
G3 fax function
Network fax func-
tion
4.1.2

Network connection and settings

To use the function to transmit image data via a network connection such as network scan and network fax
functions, connecting this machine to the network and settings for network use are required.

Network connection

Connect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on the
machine.

Network settings

Assign an IP address to the machine and complete settings for the SMTP server, etc. For details, refer to the
User manual – Network Administrator.
bizhub 501/421/361 (Version 2)
Environment and equipment
• Network connection
• Network settings
• Installation of the fax kit (optional)
• Connecting a modular cable
Internet fax • Installation of the IC-207 (optional) and hard disk (optional)
• Network connection
• Network settings
IP address fax • Installation of the fax kit (optional), IC-207 (optional) and hard disk
(optional)
• Network connection
• Network settings
4
4-3