Using The Reset Button; Resetting The Router To Factory Defaults - Arris Touchstone TG862 User Manual

Getting
Safety Started
TG862A
2 2 4
1/2 1 3
Reset USB Telephone Ethernet
10/100/1000
Reset
Button
2 2 4
1/2 1 3
Reset USB Telephone Ethernet
10/100/1000
TG862S
Ethernet
Installation Configuration

Using the Reset Button

Use the Reset button, on the back of the Telephony Gateway, to reset the modem
and perform initialization as if you power cycled the unit. You may need to reset the
Telephony Gateway if you are having problems connecting to the Internet. Using
this button will be rare.
Cable
Use a pointed non-metallic object to press this button. The photo to the left shows
the location of the Reset button. The Reset button is recessed to prevent acci-
dental resets.
Power
Switch
The diagram on the left shows the location of the reset button.
TG862S Only: The rear panel power switch can also be used to power cycle the
unit.

Resetting the Router to Factory Defaults

Cable
To reset the router to factory defaults, press and hold the Reset button on the back
of the Telephony Gateway for more than fifteen seconds. This restores the wireless
setup configuration and router configuration parameters to the factory defaults. You
may need to do this if a misconfiguration has locked out all access.
Touchstone TG862 Telephony Gateway User's Guide
Usage Troubleshooting Glossary
42