Cable Modem Startup Sequence; Using The Reset Button - Arris Touchstone DG2460 User Manual

Cable Modem Startup Sequence

US/DS
Slow Flash
(1/second)
On
(until
Upstream
acquisition
starts)
Fast Flash
(3/second)
On

Using the Reset Button

Use the Reset button (1), on the back of the Data Gateway, to reset the modem and
perform initialization as if you power cycled the unit. You may need to reset the Data
Gateway if you are having problems connecting to the Internet. Using this button will be
rare.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
Release 24 STANDARD 1.1 February 2015
Online
Off Downstream acquisition in progress
Off Downstream acquisition completed
Off Upstream acquisition in progress
Slow Flash
(during
acquisition)
On (when Upstream acquisition completed, ready for
modem IP
address
obtained)
Chapter 6: Using the Data Gateway
Description
service
Touchstone DG2460 Data Gateway User Guide 31