Water Pump - KYMCO People GT 300i Service Manual

12. COOLING SYSTEM

WATER PUMP

MECHANICAL SEAL (WATER SEAL)
INSPECTION
Inspect the telltale hole for signs of
mechanical seal coolant leakage.
If the mechanical seal is leaking, remove
the right crankcase cover and replace the
mechanical seal.
WATER PUMP/IMPELLER REMOVAL
Remove the coolant inlet hose and outlet
hose.
Remove four bolts and the water pump
cover, gasket and 2 dowel pins.
Remove the water pump impeller.
＊
The impeller has left hand threads.
Inspect the mechanical (water) seal and
seal washer if wear or damage.
＊
The mechanical seal and seal washer
must be replace as a set.
Right Crankcase Cover
Telltale Hole
Impeller
Mechanical (Water) Seal
Water pump shaft
People GT 300i
Water Pump
Water Pump Cover
Seal Washer (Porcelain)
12-8