KYMCO People GT 300i Service Manual page 86

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
CLUTCH/DRIVEN PULLEY
DISASSEMBLY
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
Set the tool in a vise and remove the clutch
drive plate nut.
• Be sure to use a clutch spring
compressor to avoid spring damage.
Special
Clutch Spring Compressor
Fittings & Nut Wrench, 41mm
Loosen the clutch spring compressor and
disassemble the
assembly.
Remove the seal collar.
Pull out the guide roller pins and guide rollers.
Remove the movable driven face from the
driven face.
Remove the oil seal from the movable driven
face.
ASSEMBLY
8-7
E053
E033
clutch/driven pulley
Guide Roller
Clutch Spring Compressor
Lock Nut Wrench
Guide Roller Pin
Movable Driven Face
Oil Seal
O-ring
People GT 300i
Clutch/Driven Pulley