KYMCO People GT 300i Service Manual page 85

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
People GT 300i
Install the weight rollers into the movable
drive face.
• The direction of all weight rolls is same.
The color side is towards to clockwise.
Ramp Plate
Install the ramp plate.
Insert the drive pulley collar into the movable
drive face.
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 153.5 mm replace if over
Check the clutch shoes for wear or damage.
Measure the clutch lining thickness.
Service Limit: 2.0 mm replace if below
Clutch Lining
8-6