Main Room Basic Operations; Turning The Power On And Off (Standby); Canceling The Main Room Operations - JVC RX-9000VBK Instructions Manual

Main Room Basic Operations

This section explains only the operations commonly used when you play any sound source in the main room.
See pages 20 for the sub-room operations.
IMPORTANT:
When using the buttons and controls on the front panel:
Check the following lamps' illumination.
For the main room operations:
• The MAIN ROOM ON/OFF lamp is lit.
• The SUB ROOM CONTROL lamp is not lit.
When using the remote control:
Check to see if the multi-room operation selector and the remote
control mode selector are set to the correct positions:
• Multi-room operation selector:
To operate this receiver for the main room,
set it to "MAIN ROOM."
• Remote control mode selector:
To operate this receiver, set it to "AUDIO/TV/
VCR."

Turning the Power On and Off (Standby)

On the front panel:
To turn on the power, press POWER.
The STANDBY lamp on the front panel goes off,
and the MAIN ROOM ON/OFF lamp on the
front panel lights red. The name of the current
main room source (or station frequency) appears
on the display.
Current source name for main room appears
Current volume level for main room is shown here
The currently selected SPEAKERS 1 (MAIN ROOM) and/or
SPEAKERS 2 (SUB ROOM) lamps on the front panel also light red.
• If the SPEAKERS 1 (MAIN ROOM) and/or SPEAKERS 2 (SUB
ROOM) lamps on the front panel are not lit, see "Activating the
Main Room Front Speakers" on page 17.
To turn off the power (into standby mode),
press POWER again.
The STANDBY lamp lights red. A small amount
of power is consumed in standby mode. To turn
the power off completely, unplug the AC power
cord.
From the remote control:
To turn on the power, press AUDIO
POWER ON.
The STANDBY lamp on the front panel goes off,
and the MAIN ROOM ON/OFF lamp on the
front panel lights red. The name of the current
main room source (or station frequency) appears
on the display.
The currently selected SPEAKERS 1 (MAIN ROOM) and/or
SPEAKERS 2 (SUB ROOM) lamps on the front panel also light
red.
• If the SPEAKERS 1 (MAIN ROOM) and/or SPEAKERS 2 (SUB
ROOM) lamps on the front panel are not lit, see "Activating the
MAIN SUB
ROOM ROOM
Main Room Front Speakers" on page 17.
AUDIO/ To turn off the power (into standby mode),
TV/VCR
press AUDIO POWER STANDBY.
CATV/DBS
The STANDBY lamp lights red.
Notes:
• When you turn off the receiver in the main room, make sure if other
people are listening to any source in the sub-room (the SUB
ROOM ON/OFF lamp and SUB ROOM speaker (SPEAKERS 2)
STANDBY
lamp on the front panel are lit green).
• If you have turned off the receiver with the volume level set at more
POWER than level "30," the volume level will be automatically set at level
"30" next time you turn on the receiver.
• If "TURN ON MAIN OR SUB ROOM" appears on the display, press
MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen the sound
in the main room or in the sub-room; otherwise, the receiver will
MAIN ROOM
ON/OFF
turn off after about 1 minute.

Canceling the Main Room Operations

On the front panel:
To stop the main room operations and sounds
from the main room speakers, press MAIN
ROOM ON/OFF.
The MAIN ROOM ON/OFF lamp on the button
goes off, and the currently selected Front speaker
lamp also goes off (no sound will be heard in the
main room).
• You cannot use this receiver for the main room operations any more.
To use this receiver for the main room
STANDBY
operations again, press MAIN ROOM ON/OFF
again.
POWER
The MAIN ROOM ON/OFF lamp on the button
lights red, and the currently selected Front
speaker lamps also light red.
Now the buttons and controls on the front panel work for the main
room operations.
From the remote control:
To stop the main room operations and sounds from the main
room speakers, press MAIN ROOM ON/OFF.
The MAIN ROOM ON/OFF lamp on the front
panel goes off, and the currently selected Front
speaker lamp on the front panel also goes off (no
sound will be heard in the main room).
• You cannot use this receiver for the main room operations any more.
STANDBY ON
STANDBY ON
MAIN ROOM
ON/OFF
MAIN ROOM
ON/OFF
MAIN ROOM
ON/OFF
15