Operating The Tuner; Storing The Preset Stations; Assigning Names To Preset Stations - JVC RX-9000VBK Instructions Manual

Operating the Tuner (Also see pages 29 and 30)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to "TUNER
CONTROL," then
press @ / #.
The TUNER CONTROL menu
appears.
3. Press % / fi to move
set or adjust, then press @ / #.
On the TUNER CONTROL menu, you can do the following:
"PRESET CH":
"BAND":
"FREQUENCY":
"FM MODE":
"PRESET MEMORY": See "Storing the Preset Stations."
Note:
* Not displayed when an AM station is selected.
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Storing the Preset Stations (Also see page 29)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The TUNER CONTROL menu appears.
3. Tune into a station on the TUNER CONTROL
menu, referring to "Operating the Tuner" above.
4. Press % / fi to move
to "PRESET
MEMORY," then press
@ / #.
The PRESET MEMORY menu
appears.
5. Press @ / # to select a
preset station number
you want.
6. Press SET to store the setting.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
46
to the item you want to
Select a preset channel station.
Select the band.
Tune in a station manually.
Select the FM reception mode.*
to "TUNER

Assigning Names to Preset Stations

(Also see page 30)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The TUNER CONTROL menu appears.
3. Press % / fi to move
4. Press @ / # to select a preset station.
5. Press % / fi to move
to "PRESET
MEMORY," then press
@ / #.
The PRESET MEMORY menu
appears.
6. Press % / fi to move
to "PRESET NAME,"
then press SET.
The character entry screen
appears.
7. Press % / fi / @ / # to
move in front of a
character you want.
You can also select the following:
: To enter space
: To erase the character
: To go back to the previous character position or go
to the next character position
8. Press SET to enter the
selected character.
9. Repeat steps 7 and 8 to
enter up to four
characters.
10.Press % / fi / @ / # to
move to "PRESET
NAME," then press
SET to store the setting.
The TUNER CONTROL menu
appears again.
11.When you finish, press EXIT repeatedly until the
menu disappears from the TV.
to "TUNER
to "PRESET CH."