JVC RX-9000VBK Instructions Manual page 58

One-Touch DVD Play
• Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
The TV automatically turns on and changes the input mode to the
position — "DVD (or DVD DIGITAL)" or "DVD MULTI" so that
you can view the playback picture.
– If the receiver is already turned on and the SUB ROOM
CONTROL lamp on the front panel is lit green, the receiver
changes the sub-room source to "DVD" (In this case, the TV
will not turn on automatically, and no sound comes out if the
DVD player is connected only through the digital input terminal
on this receiver.)
• When you press PLAY on the remote control supplied with this
receiver for operating the DVD player, the receiver automatically
turns on and changes the main room source or sub-room source
(depending on the multi-room operation selector setting on the
remote control) to the appropriate input — "DVD" (or "DVD
DIGITAL") or "DVD MULTI" as the main room source, and
DVD" as the sub-room source.
– For main room operations only: The TV automatically turns on
and changes the input mode to the position so that you can view
the playback picture.
Automatic Selection of TV's Input Mode (Only for
the Main Room Operations)
• When you select "TV SOUND" (or "TV DIGITAL") as the main
room source to play on the receiver, the TV automatically
changes the input mode to the TV tuner so that you can watch TV.
• When you select "DVD" (or "DVD DIGITAL"), "DVD MULTI,"
"VCR 1," "CDR/VCR 2, " "VIDEO" or "DBS" (or "DBS
DIGITAL") as the main room source to play on the receiver, the
TV automatically changes the input mode to the appropriate
position (either Video Input 1 or Video Input 2) so that you can
view the playback picture.
Note:
When you select "TV SOUND" (or "TV DIGITAL") as the source on the
receiver, you cannot see the menu on the TV screen since the AV
COMPU LINK remote control system automatically changes the TV's
input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can then
show the on-screen displays after changing the TV's input mode to
the appropriate position (either Video Input 1 or Video Input 2) the
receiver is connected to.
56
Automatic Power On/Off (Standby)
Automatic Power On:
The TV, VCR 1 (the VCR connected to the VCR 1 jacks), and DVD
player turn on and off along with the receiver.
• When you turn on the receiver by pressing POWER on the
front panel or AUDIO POWER ON on the remote control
(with the multi-room operation selector set to "MAIN
ROOM"):
When you turn on the main room sound by pressing MAIN
ROOM ON/OFF while the receiver is turned on:
The MAIN ROOM ON/OFF lamp lights red, and —
– If the previously selected main room source is "VCR 1," the
TV and VCR 1 will turn on automatically.
– If the previously selected main room source is "DVD" (or
"DVD DIGITAL") or "DVD MULTI," the TV and DVD player
will turn on automatically.
– If the previously selected main room source is "VIDEO,"
"CDR/VCR 2", "TV SOUND" (or "TV DIGITAL") or "DBS"
(or "DBS DIGITAL"), only the TV will turn on automatically.
• When you turn on the receiver by pressing AUDIO POWER
ON on the remote control (with the multi-room operation
selector set to "SUB ROOM"):
When you turn on the sub-room sound by pressing SUB
ROOM ON/OFF while the receiver is turned on:
The SUB ROOM ON/OFF lamp lights green, and —
– If the previously selected sub-room source is "VCR 1," the
VCR 1 will turn on automatically.
– If the previously selected sub-room source is "DVD," the DVD
player will turn on automatically.
– If the previously selected sub-room source is "VIDEO," "CDR/
VCR 2," or "DBS (or DBS DIGITAL)," nothing happens.
Automatic Power Off (Standby):
• When you turn off the receiver by pressing POWER, the TV,
VCR 1 and the DVD player will turn off (standby).
• When you turn off the main room sound by pressing MAIN
ROOM ON/OFF, the selected main room source component
turns off (unless the same component is selected as the sub-room
source), and the TV also turns off.
– If the SUB ROOM ON/OFF lamp on the front panel is lit green,
nothing happens.
• When you turn off the sub-room sound by pressing SUB
ROOM ON/OFF, the selected sub-room source component turns
off (unless the same component is selected as the main room
source).
– If the MAIN ROOM ON/OFF lamp on the front panel is lit red,
nothing happens.
Note:
If you turn off the receiver by pressing POWER or turn off the main
room sound by pressing MAIN ROOM ON/OFF while recording on the
VCR 1, the VCR 1 will not turn off, but continue recording.
OR
OR