Activating The Dsp Modes - JVC RX-9000VBK Instructions Manual

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
For Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround
1. Press SURROUND ON/OFF so that the lamp on
the front panel button lights up.
• Each time you press the button, the Dolby/DTS Surround turns
on and off alternately.
SURROUND ON/OFF
On the front panel
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
• To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with
To cancel the Dolby/DTS Surround mode
Press SURROUND ON/OFF again so that the lamp on the front
panel button goes off. ("SURROUND OFF" appears on the display.)
SURROUND ON/OFF
On the front panel
40
SURROUND
ON/OFF
On the remote control
mark.
DOLBY SURROUND
mark.
D I G I T A L
mark.
SURROUND
ON/OFF
On the remote control
For the other DSP modes
On the front panel:
1. Press DSP MODE repeatedly until
the mode you want appears on the
display.
• Each time you press the button, the DSP
modes change. (See page 34 for more
details.)
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software:
– encoded with Dolby Surround and labeled with
mark.
DOLBY SURROUND
– encoded with Dolby Digital and labeled with
mark.
D I G I T A L
– encoded with DTS Digital Surround and labeled with
mark.
To cancel the DSP mode
Press DSP MODE repeatedly until "DSP OFF"
appears on the display.
From the remote control:
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change.
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software:
– encoded with Dolby Surround and labeled with
mark.
DOLBY SURROUND
– encoded with Dolby Digital and labeled with
mark.
D I G I T A L
– encoded with DTS Digital Surround and labeled with
mark.
To cancel the DSP mode
Press SURROUND MODE repeatedly until
"DSP OFF" appears on the display.
DSP MODE
DSP MODE
SURROUND
MODE
SURROUND
MODE