Nortel CallPilot Mini Installation And Maintenance Manual page 48

48 Chapter 6 Language Configuration Utility
15 Check the information that appears on this screen.
If the information is correct, click the Finish button.
If the information is not correct, click the Back button and correct the information before
proceeding.
A dialog box appears when the language change is completed.
16 Click the OK button.
17 If you want to change the second language, repeat steps 4 to 16 for the second language.
18 Reboot the CallPilot Mini/CallPilot 150 by removing the power cable from the CallPilot Mini/
CallPilot 150, waiting 30 seconds and then reconnecting the power cable.
P0990474 03