Nortel CallPilot Mini Installation And Maintenance Manual page 42

42 Chapter 5 Initializing the CallPilot Mini/CallPilot 150
Field name
Country
From Line
To Line
Number of rings
Mailbox Keycode
From Extension
To Extension
Outdial Method
4
Click the Install button.
5 If you are initializing a CallPilot Mini, reboot the CallPilot Mini.
You can now start programming the CallPilot parameters. For information about how to program
CallPilot, refer to the CallPilot Manager Set Up and Operation Guide.
Note: If you have changed any of the IP addresses or the Subnet Mask, you must reboot
the CallPilot Mini/CallPilot 150 before you start programming the CallPilot parameters.
P0990474 03
Description
Select the country in which the CallPilot 150 is installed.
The country you select determines several country specific settings such as the
telephone number length, mailbox login sequence and Call Progress Tone Detection.
You must select the country that the CallPilot 150 is in to ensure proper operation.
The default is North America.
Enter the line number of the first line in a range of lines that you want the auto-attendant
to answer.
The auto-attendant answers this line and all of the lines up to the line number you enter
in the To Line box.
Enter the line number of the last line in a range of lines you want the auto-attendant to
answer.
The line number you enter in this box must be the same or higher than the line number
you enter in the From Line box.
Enter the number of rings that CallPilot waits before answering a line.
If you have purchased additional mailboxes for CallPilot, enter the keycode you received
with your mailbox package.
If you have not purchased additional mailboxes, leave these boxes empty.
Use these boxes only for the keycode for additional mailboxes. Do not enter the keycode
that enables the basic voicemail application.
Enter the extension number of the first telephone in a range of telephones you want to
create a mailbox for.
A mailbox is created for this telephone and for all of the telephones up to the extension
number you enter in the To Extension box.
The mailboxes are named according the set name of the telephone and assigned Class
of Service 1.
Enter the extension number of the last telephone in a range of telephones you want to
create a mailbox for.
The extension number you enter in this box must be the same or higher than the
extension number you enter in the From Extension box.
Select the outdial method you want to assign to the mailboxes created using the From
Extension and To Extension boxes. You can choose None, Line, Pool or Route.
If you select None, no outdial method is assigned to the mailboxes.
If you select Line, click the Outdial Method text box and enter the line number of the line
you want assign to the mailboxes.
If you select Pool, click the Outdial Method text box and enter the line pool number of
the line pool you want to assign to the mailboxes.
Note: Line pool numbers 0 to 15 correspond to the Line Pools A to O on the KSU
programming interface.
If you select Route, click the Outdial Method text box and enter the route number of the
route you want to assign to the mailboxes.