Nortel CallPilot Mini Installation And Maintenance Manual page 40

40 Chapter 5 Initializing the CallPilot Mini/CallPilot 150
Field name
Default Gateway
Digits per
Extension
Attendant DN
Primary
Language
Country
Companding Type Select the companding law that is used by your Meridian 1 switch and the public
Mailbox Keycode
From Extension
To Extension
Outdial Method
P0990474 03
Description
Enter the IP Address of the default next-hop router. If you do not know the IP Address,
contact your network administrator.
Note: If you do not require a next-hop router, leave this box blank.
Select the length of the extension number in digits.
Enter the directory number of the attendant. You can enter a number from 1 to 7 digits
long.
Select the default language that is used for voice prompts, text messages, and the
Auto-Attendant.
You can change the language of individual mailboxes by assigning a different Class of
Service to those mailboxes.
Select the country in which the CallPilot Mini is installed.
The country you select determines several country specific settings such as the
telephone number length, mailbox login sequence and Call Progress Tone Detection.
You must select the country that the CallPilot Mini is in to ensure proper operation.
The default country is North America.
switched telephone network.
You can select A-Law or M-Law.
If you have purchased additional mailboxes for CallPilot, enter the keycode you received
with your mailbox package.
If you have not purchased additional mailboxes, leave these boxes empty.
Use these boxes only for the keycode for additional mailboxes. Do not enter the keycode
that enables the basic voicemail application.
Enter the extension number of the first telephone in a range of telephones you want to
create a mailbox for.
A mailbox is created for this telephone and for all of the telephones up to the extension
number you enter in the To Extension box.
The mailboxes are named according the set name of the telephone and assigned Class
of Service 1.
Enter the extension number of the last telephone in a range of telephones you want to
create a mailbox for.
The extension number you enter in this box must be the same or higher than the
extension number you enter in the From Extension box.
Select the outdial method you want to assign to the mailboxes created using the From
Extension and To Extension boxes. You can choose None, Line, Pool or Route.
If you select None, no outdial method is assigned to the mailboxes.
If you select Route, a route is assigned as the Outdial Method for the mailboxes.