3. Setting
4: LCD Settings (Setting Model Display, Version Display, Backlight, and
3.5.
Setting Menu
This section is for confirming the model and the product version, and also set the backlight and the display update time.
the operation mode, press
available.
Setting menu
①
Model Display
②Version display
③
Backlight brightness
Backlight auto off
④
SET
⑤Display update time
SET
Setting Menu
Display Update Time)
+
simultaneously for 2 seconds or more, and the following operation becomes
Set the setting menu number to "4".
(as shown in the right figure)
The model can be confirmed. (This is only display, and settings cannot be changed.)
(1)
Middle Line
The product version can be checked.
(The product version is displayed, but cannot be changed.)
The backlight brightness can be adjusted.
1
2
Dark
The backlight can be set to continuous on (HoLd)
or auto off (Auto).
Auto
(Auto off)
(Continuous on)
<When auto off (Auto) is selected>
No button operation for 5 minutes → the backlight turns off
Button operation during off (Note) → the backlight turns on
The display update time for the measured value can be change.
If the display switches too quickly for you to read the displayed
value, set it to 1.0 second.
(Normally, leave this setting to 0.5 second.)
0.5second
According to the setting flow (page 14), save the changed
contents, or continue to the other setting menu.
Model
ME96SSEA-MB
3
4
5
Bright
HoLd
Note: When the backlight is off, pressing any
button once does not switch the display but only
turns on the backlight.
Pressing any button again switches the display.
for 5 minutes
1second
23
In