Loading Media With Optional Cutter; Loading Media With Optional Dispenser And Liner Discharge Outlet - SATO Cl4NX Operator's Manual

3 Loading Ribbon and Media
3.5.3

Loading Media with Optional Cutter

Refer to the procedures in
load the media.
For model with cutter installed, pull the tab
cutter unit to the direction as shown, then open up
the cutter before passing the media through the
cutter.
CAUTION
• Be careful not to touch the cutter blade.
3.5.4 Loading Media with Optional Dispenser and Liner Discharge
Outlet
This section describes the procedures to dispense the
label and eject the liner out of the printer.
1
Refer to the steps 1 to 6 of
Loading Media Roll
2
Press the tab  at the front of the printer to
open the dispenser unit .
40
CL4NX Operator Manual
Section 3.5.1 Loading Media Roll
of the

Section 3.5.1
to load the media.
or
Section 3.5.2 Loading Fan-fold Media
2
2
1
to
1
1