Usable Media; Adjusting The Position Of The Media Sensor - SATO Cl4NX Operator's Manual

3 Loading Ribbon and Media

3.4 Usable Media

This printer can print on two types of media; media roll and fan-fold media. The printer uses sensors to
detect I-marks or Gaps on the media in order to precisely position the print content.
1.5 mm (0.06")
3 mm
(0.12")
I-mark label
3.4.1

Adjusting the Position of the Media Sensor

When you use the nonstandard media (for example, media with printing on the rear, or media with
special shape), the media sensor cannot sense the I-mark or Gap of the media correctly. In such case,
adjust the position of the media sensor to sense the I-mark or Gap correctly.
Move the media sensor to the position where it can
sense the I-mark or Gap of the media.
The I-mark sensor is below the
sensor is below the
36
CL4NX Operator Manual
1.5 mm (0.06")
3 mm
(0.12")
14 mm
(0.55")
mark, and the Gap
mark.
3 mm
(0.12")
Gap label
3 mm (0.12")
14 mm
(0.55")
I-mark journal paper