System Diagnosis / Fault Test; Shutdown And Ups Management Software - AEG Protect A. 1000 Operating Instructions Manual

EN
5.7.3

System Diagnosis / Fault Test

If the monitoring electronics detect an irregularity, the fault
indicator is activated which is signalled by the "Fault"
pictogram and a digital fault code, possibly accompanied by
an acoustic fault signal. This might occur because the battery
undervoltage limit has been reached, if the temperature has
risen too high, or it might indicate that the internal battery
system needs to be renewed.
5.7.4

Shutdown and UPS Management Software

The "CompuWatch" software specially developed for these
purposes by AEG continuously checks the mains supply and
the UPS status.
Refer to the manual on the CD for details about installing the
software
Other tips and information as well as updates are available
from our website at
PRODUCTS >> Software >> CompuWatch.
Faults detected and signalled during diagnosis
must be rectified, otherwise there is a risk of
load voltage loss if a mains failure occurs!
on the various
http://www.AEGpartnerNet.com
In conjunction with
the "intelligent" UPS,
this guarantees the
availability of the EDP
components as well
as the data security.
The
shutdown
supports
operating
e.g. Windows Linux,
Unix, Mac OS X, etc.
operating
25
"CompuWatch"
software
different
systems,
systems.
>>