Internet Protocol Configuration; Figure 45 - Installation Wizard Internet Protocol Configuration - Motorola PTP 600 Series User Manual

A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Quick Install Guide. If
subsequently the license key has been mislaid, replacement keys can be applied for online or
via your distributor.
If a valid license key is not detected in the unit's non-volatile memory then the user is
prompted to enter a valid key. It should be noted that 600 Series bridge units are shipped as
link pairs and, as such, valid license keys are entered during the production process. To enter
a license key simply type or paste the license key into the data entry box (Figure 44) and click
the 'validate license key' button.
8.3.4.2

Internet Protocol Configuration

Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP)
configuration.

Figure 45 - Installation Wizard Internet Protocol Configuration

101