Legal And Regulatory Notices; Important Note On Modifications; National And Regional Regulatory Notices; Federal Communication Commission (Fcc) And Industry Canada (Ic) Notification - Motorola PTP 600 Series User Manual

17

Legal and Regulatory Notices

17.1

Important Note on Modifications

Intentional or unintentional changes or modifications to the equipment must not be made
unless under the express consent of the party responsible for compliance.
modifications could void the user's authority to operate the equipment and will void the
manufacturer's warranty.
17.2

National and Regional Regulatory Notices

17.2.1 U.S. Federal Communication Commission (FCC) and Industry Canada (IC) Notification
This system has achieved Type Approval in various countries around the world. This means
that the system has been tested against various local technical regulations and found to
comply. The frequency band in which the system operates is 'unlicensed' and the system is
allowed to be used provided it does not cause interference. Further, it is not guaranteed
protection against interference from other products and installations.
This device complies with part 15 of the US FCC Rules and Regulations and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. In Canada, users should be
cautioned to take note that high power radars are allocated as primary users (meaning they
have priority) of 5250 – 5350 MHz and 5650 – 5850 MHz and these radars could cause
interference and/or damage to license-exempt local area networks (LELAN).
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the US FCC Rules and with RSS-210 of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio-frequency
energy and, if not installed and used in accordance with these instructions, may cause
harmful interference to radio communications.
interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to correct the interference by one or more of
the following measures:
•
Increase the separation between the affected equipment and the unit;
•
Connect the affected equipment to a power outlet on a different circuit from that which the
receiver is connected to;
•
Consult the dealer and/or experienced radio/TV technician for help.
•
FCC IDs and Industry Canada Certification Numbers are listed in
If this equipment does cause harmful
215
Any such
Table 26