Reset Ip & Ethernet Configuration; Figure 85 - Confirm Reset To Factory Default Pop Up; Figure 86 - Ip And Ethernet Erased Successfully Page - Motorola PTP 600 Series User Manual

9.2 Reset IP & Ethernet Configuration
To reset IP & Ethernet configuration back to factory defaults the user should press the "Reset
IP & Ethernet Configuration back to factory defaults" button on the "Recovery Options" page
(Figure 81). The user will now be presented with a pop up box asking them to confirm the
action (Figure 85).

Figure 85 - Confirm Reset to Factory Default Pop Up

On confirmation the following page will be displayed (Figure 86). The user should now reboot
the unit by pressing the "Reboot" button.

Figure 86 - IP and Ethernet Erased Successfully page

147