Spectrum Management; Figure 60 - Reboot Confirmation Pop Up - Motorola PTP 600 Series User Manual

When the software image has been written to non-volatile memory Figure 59 will be displayed
showing the status of the software upload.
Reboot the unit by clicking the "Reboot Wireless Unit" button. You will be asked to confirm
this action as shown in Figure 60.

Figure 60 - Reboot Confirmation Pop Up

This will reboot the unit, taking up to 120 seconds. During this time you will not be able to
communicate with the unit.
If you cannot communicate with the unit after 120 seconds, this could indicate a problem with
the memory update process. Under these circumstances the user should enter "Recovery
Mode", see section 9.
After the reboot the user should check that the required software image is loaded and
running.
8.3.7

Spectrum Management

Spectrum Management Selection is the PTP 600 Series Bridge feature that monitors the
available wireless spectrum and directs both ends of the wireless link to operate on a channel
with a minimum level of co-channel and adjacent channel interference.
116