Operational Restrictions; Radar Avoidance; Table 5 - Ptp 600 Series Bridge Region Code Definitions - Motorola PTP 600 Series User Manual

Region Frequency
Code Band
12 5.4 GHz
13 5.4 GHz
When shipped from the factory units
•
PTP 600 Series Bridge 5.4 GHz – Region Code 12
•
PTP 600 Series Bridge 5.8 GHz – Region Code 1
5.3

Operational Restrictions

5.3.1

Radar Avoidance

Radar Avoidance requires that equipment used in the region:
•
Detects interference from other systems and avoids co-channel operation with these
systems, notably radar systems.
•
Provide on aggregate a uniform loading of the spectrum across all devices.
To address the primary aims the Spectrum Management algorithm implements a radar
detection function which looks for impulsive interference on the active channel only. If
impulsive interference is detected Spectrum Management will mark the current active channel
as having detected radar and initiate a channel hop to an available channel. The previous
active channel will remain in the radar detected state for thirty minutes after the last impulsive
interference pulse was detected. After the thirty minutes have expired the channel will be
returned to the available channel pool.
6
Note that 5.8GHz and 5.4 Ghz are different products.
7
Note that the Quickstart Guide also contains the license keys for region 10. This bars operation in
the Band 5600 – 5650 MHz and MUST be used for equipment depoyed in Canada and Australia.
Regulations /
Countries
ETSI, USA
Australia, Canada
Table 5 – PTP 600 Series Bridge Region Code Definitions
6
are configured as follows:
Max Tx EIRP
Power Limit
7dBm 30dBm
7dBm 30dBm
7
40
Operational
Restrictions
(see section 5.3)
Radar Avoidance Enabled
Radar Avoidance Enabled;
Weather Radar Band (5600
to 5650MHz) barred