Software/Features; Status Page; Figure 101 - Connectorized 600 Series Bridge Status Page - Motorola PTP 600 Series User Manual

In FCC regions when using external antennas – cable loss between the connectorized
version of the 600 Series bridge and the antenna ports must not be less than 1.2dB

13.3 Software/Features

The variant operates in the same way as the basic 600 Series bridge and is released initially
with the feature set of the Connectorized 600 Series bridge.
functionality is modified are:

13.3.1 Status Page

The link loss calculation presented on the Status Page of the management interface has to be
modified to allow for the increased antenna gains at each end of the link. The manufacturing
process of the Connectorized 600 Series bridge configures the standard hardware of the unit
for use with external antennas. The installer is prompted, as part of the installation process, to
enter the gain of the external antenna(s) and cable losses at each end of the link.
Peer-to-peer messaging is used to pass the effective antenna gain to each end of the link so
that the link loss calculations can be correctly computed.

Figure 101 - Connectorized 600 Series bridge Status Page

173
The areas where the