Cutter/Perforation Cutter; Option - CAB EOS1 Operator's Manual

20 5

Option

5.1 Cutter/Perforation Cutter

The cutter /perforation cutter contained in the contents of delivery must be
mounted to the printer during the initial start-up.
5
4
3
1
Fig. 13
1. Put snap arm (5) of the cutter with the groove (4) first into the guide on the
retainer (2).
2. Push cutter (1) down into the holders (3).
3. Fold up cutter (1) so that is snaps it at both sides of the retainer (2).
Mount Cutter or Perforation Cutter
1
2
21 20