Placing Calls; Calling From The Dialer - Polycom WX 400 User Manual

To manage a call, use the up and down keys to highlight it. Then, press one of the soft keys to
hold, resume, end, or transfer the highlighted call, or set up a conference with the highlighted
call.

Placing Calls

You can place a call using the handset, speakerphone, or headset. You can dial the number
first, and then choose the method—by picking up the handset, pressing
choose the method first, and then dial the number.
You can place calls in these ways:
 Manually, from the Dialer
 Automatically, by tapping a favorite in Home or Lines view
 Automatically, from your Favorites list, Recent Calls list, or Contact Directory.

Calling from the Dialer

The Dialer displays a list of previously-placed calls. Select one of the entries to automatically
enter it. Or, start entering a number. As you enter numbers, the Dialer displays a list of similar
numbers, as shown next. Use the up and down arrow keys to select a match and automatically
enter it.
To display the Dialer, do one of the following:
 From Home view, select New Call.
 From Lines or Calls view, press New Call. (The New Call soft key won't display if you
have an active call.)
 If your phone is idle, start entering a phone number.
 Pick up the handset, or press
active call.
. This method only works if you don't have an
or
Chapter 2: Using Basic Features
—or
, or pressing
15