Table of Contents
Advertisement
CP50 Mobile Computer
Note: Refer to the specifications of the RFID tag to read for its memory organization.
MIFARE KEYS
Mifare Keys setting changes the security keys A and/or B for a Mifare tag's data block.
Keys A and B are two keys that enable the RFID reader to access (read or write) a Mifare
tag's data block.
To open Mifare Keys setting page:
1) Open General tabbed page as described in
General tabbed page opens.
2) Tap Mifare Keys button.
Mifare Keys setting page opens.
[Mifare Keys] setting
Edits keys A & B
Assigns the blocks
to apply change
66
default blocks (also "pages"), and different
amount of bytes and number of blocks. The data
written is truncated to fit the blocks of the targeted
RFID tag. Therefore part of the data may be
discarded when it comes to the end of a block end.
See Appendix IV: HF RFID Reader to know
Tag Default
Block.
RFID
General tabbed
page.
Shows what each key A
and B currently is.
Tap this button to enact the
change.
Reference Manual
Advertisement
Table of Contents
