Table of Contents
Advertisement
CP50 Mobile Computer
GSM/UMTS tabbed page opens.
6) Tap GSM (2G Only) from the drop-downs.
7) Tap Apply to apply the change.
8) Tap the "OK" command on
5.1.5. CELLULAR DATA SETUP
To set up mobile data (GPRS/EDGE/UMTS/HSPA):
1) On Start screen, tap Settings | Connections | Connections (Manager)
Connections setting opens showing Tasks tabbed page.
2) Tap Add a new modem connection under My ISP.
Make New Connection page opens.
3) Name the connection.
4) From Select a modem drop-down menu, tap Cellular Line (GPRS).
5) Tap Next to proceed.
6) Enter the Access Point Name (APN) of the connection. Consult your mobile carrier for
such APN (for instance, "Internet").
7) Enter the username, password, and domain if your connection needs them. And tap the
Advanced... button if your connection needs TCP/IP and specific server address.
8) Tap the "Finish" command on
The mobile computer tries to connect to your mobile service. Once connected, it can be
checked up as described in
118
Softkey bar
to quit setting.
Make New Connection
Softkey bar
to apply the change and settings.
Check What Network You're
Reference Manual
Using.
.
Advertisement
Table of Contents
