CipherLab CP50 Manual Manual page 260

Full ASCII conversion
Select Length
Intercharacter gap size The
Code 93
Select Length
MSI
Check digit verification If Two Check Digits option is selected, an additional
Transmit check digit
Select Length
GS1 DataBar (RSS)
GS1 Databar-14
GS1 Databar Limited
GS1 Databar Expanded This group consists of (1) GS1 DataBar Expanded, and (2)
transmitted.
"Check digit verification" must be enabled.
Code 39 Full ASCII includes all the alphanumeric and special
characters.
One or two fixed lengths
Range (1~55)
Code 39 and
intercharacter gap that is typically quite small. Due to
various barcode printing technologies, this gap can grow
larger than the maximum size allowed, preventing the scan
engine from decoding a barcode. If this problem occurs, set
it to "Large Intercharacter Gaps" to tolerate these
out-of-specification barcodes.
Normal intercharacter gaps
Large intercharacter gaps
One or two fixed lengths
Range (1~55)
verification is required to ensure integrity. Select one of the
algorithms below. If the check digit is incorrect, the barcode
will not be accepted.
Check Digit
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
One or two fixed lengths
Range (1~55)
GS1 DataBar-14 is short for GS1 DataBar Omnidirectional.
This group consists of (1) GS1 DataBar Omnidirectional, (2)
GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and (4)
GS1 DataBar Stacked Omnidirectional.
GS1 DataBar Expanded Stacked.
Appendix III 2D Imager (SE4500DL)
Codabar symbologies
Algorithm
Single Modulo 10
Mod 10/Mod 11
Mod 10/Mod 10
Disable
4~55
have an Normal
Enable
4~55
Enable
Single Modulo
10
No
4~55
---
Enable
Enable
Enable
247