CipherLab CP50 Manual Manual page 169

CP50 Mobile Computer
17) Tap the "OK" command on Softkey bar to apply change and quit setting.
18) Open Start screen, tap Settings | System | External GPS
GPS settings open showing Programs tabbed page.
The page shows the virtual COM port for GPS applications set to COM7, the default. The
GPS data sent to GPS software or location-aware applications is streamed through this
port. Do not change the setting here.
19) Tap Hardware tab.
Hardware tabbed page opens showing GPS
hardware port set to "COM9". As COM9 has been
occupied by the built-in GPS receiver, set another
COM port for your external GPS receiver. See the
following to proceed.
156
Programs tabbed page
Hardware tabbed page
Reference Manual
.