Auto-Learning Procedure For Emergency Electronic Key - Cobra Bridge compact alarm Fitting Instruction And User Manual

R

AUTO-LEARNING PROCEDURE FOR EMERGENCY ELECTRONIC KEY

AUTO-LEARNING PROCEDURE FOR EMERGENCY ELECTRONIC KEY AUTO-LEARNING PROCEDURE FOR EMERGENCY ELECTRONIC KEY AUTO-LEARNING PROCEDURE FOR EMERGENCY ELECTRONIC KEY AUTO-LEARNING PROCEDURE FOR EMERGENCY ELECTRONIC KEY
The electronic keys can control the alarm exactly as the radio remote controls. They increase
the security degree during the autolearning procedure. The use of electronic keys will semplify
the emergency and programming procedures. To add electronic keys, fit the emergency
panel and connect it as shown in the fitting diagrams.
Proceed in the following way:
1. 1. 1. 1. 1. Disarm the system.
2. 2. 2. 2. 2. Prepare all the keys to add.
3. 3. 3. 3. 3. Turn the starter key ON and then OFF for three times within 7 seconds.
4. 4. 4. 4. 4. The LED will blink once during 3 seconds signalling that you can insert the PIN code.
5. 5. 5. 5. 5. After the LED will go off turn the ignition ON and count the LED blinks up to the
number which is the first digit of your PIN (referring to the example: 2 blinks=2 is
the first digit) then turn the ignition OFF.
Repeat the same procedure for all the digits.
In case of any mistake just wait for ten seconds with the ignition key OFF without
making any operation and then come back to step 5.
6. 6. 6. 6. 6. If the system has not already working electronic keys turn the ignition ON. The LED
will come on a fixed way signalling that the PIN is correct. Go to step 8.
7. 7. 7. 7. 7. If the system has already working electronic keys turn the ignition ON and then put
the key in connection with the emergency panel. The LED will come on a fixed way
signalling that the PIN is correct and that the electronic key has been identified.
8. 8. 8. 8. 8. Put the key in connection with the emergency panel for about 1 second; the LED will
go OFF and the ON again signalling that electronic key has been added to the system.
9. 9. 9. 9. 9. Repeat the operation described in step 8 for all the keys you want to add.
10.The auto-learning procedure can be interrupted at any moment by simply turning 10. 10. 10. 10.
the ignition key OFF.
Note: Note: Note: Note: Note: As soon as a new electr As soon as a new electr As soon as a new electr As soon as a new electr As soon as a new electronic key is added to the system it will automatically onic key is added to the system it will automatically onic key is added to the system it will automatically onic key is added to the system it will automatically onic key is added to the system it will automatically
put out of order the old key set. If you want to keep them working you put out of or put out of or put out of or put out of or der the old key set. If you want to keep them working you der the old key set. If you want to keep them working you der the old key set. If you want to keep them working you der the old key set. If you want to keep them working you
must add the old keys again. The system can works with maximum 4 keys. must add the old keys again. The system can works with maximum 4 keys.
must add the old keys again. The system can works with maximum 4 keys. must add the old keys again. The system can works with maximum 4 keys. must add the old keys again. The system can works with maximum 4 keys.
If the system is alr If the system is alr If the system is alr If the system is alr If the system is already equipped with electr eady equipped with electr eady equipped with electronic emer eady equipped with electr eady equipped with electr
access to the pr access to the pr ogramming and autolear ogramming and autolear
access to the pr access to the pr access to the programming and autolear ogramming and autolear ogramming and autolearning pr
to the key and PIN identification. to the key and PIN identification. to the key and PIN identification. to the key and PIN identification. to the key and PIN identification.
GB
52
onic emergency keys, the onic emer onic emer onic emer gency keys, the gency keys, the gency keys, the gency keys, the
ning pr ning pr ocedur ocedur es is subor es is subor dinate dinate
ning pr ning procedur ocedur ocedures is subor es is subordinate es is subor dinate dinate
PIN CODE
PIN CODE = 2341
EXAMPLE
OFF
ON ON
+
a
IGN IGN
MAX 7 SEC.
LED ON X 2
ON
b
3 4 1
ON
LED ON X 3
c
2 4 1
LED ON X 4
ON
d
2 3 1
ON LED ON X 1
e
2 3 4
ON OK
ON 3 SEC.
OFF OFF
ON
+ =
OK
IGN
OFF
OFF
OFF
OFF
GB
R
53