Positioning The Parts Of The System - Cobra Bridge compact alarm Fitting Instruction And User Manual

Table of Contents

Advertisement

R
GB
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
This product is preset to comply with the EC Directives. The buzzer and the voltage
This product is preset to comply with the EC Directives. The buzzer and the voltage
This product is preset to comply with the EC Directives. The buzzer and the voltage
This product is preset to comply with the EC Directives. The buzzer and the voltage
This product is preset to comply with the EC Directives. The buzzer and the voltage
drop sensor can be activated only for no european countries. In case of activation the
drop sensor can be activated only for no european countries. In case of activation the
drop sensor can be activated only for no european countries. In case of activation the
drop sensor can be activated only for no european countries. In case of activation the
drop sensor can be activated only for no european countries. In case of activation the
homologation will be invalidated.
homologation will be invalidated.
homologation will be invalidated.
homologation will be invalidated.
homologation will be invalidated.
Disconnect the negative wir
Disconnect the negative wir
Disconnect the negative wir
Disconnect the negative wir
Disconnect the negative wire fr
to install the system and only connect it again after the system
to install the system and only connect it again after the system
to install the system and only connect it again after the system
to install the system and only connect it again after the system
to install the system and only connect it again after the system
has been fitted.
has been fitted.
has been fitted.
has been fitted.
has been fitted.
FOREWORD
FOREWORD
FOREWORD
FOREWORD
FOREWORD
This system is compatible with engine driven vehicles with 12V batteries and negative
ground.
The kit must be installed by a qualified technician in compliance with the supplied
instructions. The installation certificate must be filled out in all parts by the installer.
Do not make alterations or modifications to the system since such action automatically
voids the installation certificate.
Delta Elettronica S.p.A. assumes no responsibility for damage caused by incorrect
installation of the system or by failure to comply with the indicated technical
specifications.

POSITIONING THE PARTS OF THE SYSTEM

POSITIONING THE PARTS OF THE SYSTEM
POSITIONING THE PARTS OF THE SYSTEM
POSITIONING THE PARTS OF THE SYSTEM
POSITIONING THE PARTS OF THE SYSTEM
ALARM
ALARM
ALARM
ALARM
ALARM
This must be positioned inside the engine compartment as far as possible from heat
sources. Refer to the drawings for the unit fastening on the bracket and its orientation.
Look for a fixing point not influenced to the motor vibration
We raccomand to fix the unit in a hidden position, difficult to be reached.
e fr
e fr
om the battery befor
om the battery befor
e beginning
e beginning
e from the battery befor
e fr
om the battery before beginning
om the battery befor
e beginning
e beginning
45
GB
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents