Deactivating The Volumetric Ultrasonic Sensor; Emergency Unset Procedure - Cobra Bridge compact alarm Fitting Instruction And User Manual

R

DEACTIVATING THE VOLUMETRIC ULTRASONIC SENSOR

DEACTIVATING THE VOLUMETRIC ULTRASONIC SENSOR DEACTIVATING THE VOLUMETRIC ULTRASONIC SENSOR
DEACTIVATING THE VOLUMETRIC ULTRASONIC SENSOR DEACTIVATING THE VOLUMETRIC ULTRASONIC SENSOR
The volumetric sensor can be
disactivated if you want to leave
the windows open or if someone
remains in the passenger
compartment.
B
1) Arm the system pressing button A of the radio control.
2) Press button B on the radio control within 40 seconds.
To confirm that the signal has been received, there will be an acoustic signal of the
buzzer and the windows will stop (if the automatic window closing is activated). The
volumetric sensors have been inhibited; all other protective functions remain activated.
EMERGENCY UNSET PROCEDURE BY USING THE ELECTRONIC KEYS EMERGENCY UNSET PROCEDURE BY USING THE ELECTRONIC KEYS EMERGENCY UNSET PROCEDURE BY USING THE ELECTRONIC KEYS
EMERGENCY UNSET PROCEDURE BY USING THE ELECTRONIC KEYS EMERGENCY UNSET PROCEDURE BY USING THE ELECTRONIC KEYS
Put the emergency electronic key in connection with the emergency panel for about 1
second. The LED will go OFF. The system disarms.
EMERGENCY UNSET PROCEDURE BY USING THE PIN EMERGENCY UNSET PROCEDURE BY USING THE PIN
EMERGENCY UNSET PROCEDURE BY USING THE PIN EMERGENCY UNSET PROCEDURE BY USING THE PIN EMERGENCY UNSET PROCEDURE BY USING THE PIN
Follow this procedure if the remote control does not work. The intrusions and the ignition
key will trigger the alarm proceeding as indicated.
The PIN code you can find on the last page of this instruction manual or on the
EMERGENCY KEY CARD included in the kit, will give you the access to the system.
This code is unique, different system by system, and protects all the security procedures.
1. 1. 1. 1. 1. Turn the starter key ON and then OFF for three times within 7 seconds.
2. 2. 2. 2. 2. The LED will blink once during 3 seconds signalling that you can insert the PIN code.
3. 3. 3. 3. 3. After the LED will go off switch the ignition ON and count the LED blinks up to the
number which is the first digit of your PIN ( referring to the example: 2 blinks=2 is the
first digit) then switch the ignition OFF.
Repeat the same procedure for all the digits.
4. 4. 4. 4. 4. In case of any mistake just wait for ten seconds with the starter key OFF without
making any operation and then come back to step 1.
Please refer to the example of the next page. The assumption is that the PIN is 2341.
14
GB
A
mod. 7777
mod. 7727
A
B
PIN CODE
PIN CODE = 2341
EXAMPLE
OFF
ON ON
+
a
IGN IGN
MAX 7 SEC.
ON LED ON X 2
b
3 4 1
ON
LED ON X 3
c
2 4 1
LED ON X 4
ON
d
2 3 1
ON
LED ON X 1
e
2 3 4
If the code is corresponding to your PIN the unit will disarm.
ON 3 SEC.
OFF OFF
ON
+ =
OK
IGN
OFF
OFF
OFF
OFF
GB
R
15