[Device Setting]; Communicating Using Ipv6 - Oce VarioLink 2222c User Manual

2.2

Communicating using IPv6

[Device Setting]

In [Administrator Settings] on the Control Panel, select [Network Settings]ö[Forward]ö[Detail Set-
tings]ö[Device Setting].
Item
[MAC Address]
[Network Speed]
2.2 Communicating using IPv6
Configure settings for IPv6 communication.
These settings are required if you want use this machine with an IPv6 address assigned. You can use IPv6
together with IPv4, but you cannot use IPv6 alone.
When you use this machine in an IPv6 environment, the following restrictions apply.
- Printing with SMB is not supported (but it is allowed for the Direct Hosting service).
- No scanned data can be sent with SMB (but it is allowed for the Direct Hosting service).
- SMB browsing is not supported (available for Publication Service).
- NTLM authentication is not supported (but it is allowed for the Direct Hosting service).
- You cannot use the IP filtering function.
- You cannot use the installer of the printer driver (available for Windows Vista or Server 2008).
- You cannot display Web Connection in Flash.
d
Reference
For details on the Direct Hosting service, refer to the sections listed below.
"Sending scanned data to a computer on network" (page 4-3)
"Print (SMB)" (p. 5-5)
"Restricting users of this machine (Windows domain or workgroup)" (p. 7-15)
VL3622c/VL2822c/VL2222c
Description
Displays the MAC address of the network interface card of
this machine.
Specify the network speed.
2
Prior check
2-5