Table of Contents
Advertisement
Setup menu items
- -
- -
--
p . - - - -
ltem
1
N i / ? $ I
Setting (factory setting underlined)
30F: NTSC (30 frames)
25F: PAUSECAM (25 frames)
Factory setting
For U.S., Canada: 30F
SIGNAL STANDARD
VTR signal standard (NTSC or PAUSECAM)
SEtUP-O0
MAX PREROLL TIME
Preroll time selected when PREROLL selector
SignAL
is set to 7
AUTOCOUNTERRESET
Whether or not the counter shall be reset
automatically when the first edit point is
entered, if the TCIRTCICTL selector is se! to
RTC or CTL
10H: From -9:59:59:29(24) to
-
t9:59:59:29(24)
24H: From 00:00:00:00 to
1
SEtUP-01
TIME COUNTER RANGE
The display range when !he TCIRTCICTL
selector is se! to RTC or CTL
The display range for total tape running time is
also determined by this sening
23:59:59:29(24)
(Values in parentheses for PAU
SECAMI
1
SEtUP-O2
a u t o i liting"
'
'
AUTO EDlT POlNT ENTRY
SEtUP-05
In automatic editing, whether or not !he OUT
point of the previous edit is automatically set
as IN poirit of the next edit
1
For Europe: 25F
SEtUP-03
Auto Ent
r
PrEroll
Auto Ctr
Ctr diSP
GPI OUT REFERENCE
SEtUP-06 GPl rEF
Whether GPI trigger signals shall be output a!
!he effect transition start point (Ni3 rol1 editing
only), at the recorder IN point, or at the preroll
T
7SEC: 7 seconds
1 OSEC: 10 seconds
m:
No automatic reset
On: Automatic reset
However, if the selector is set to CTL and
the VTR is set for automatic edit point
setting (with setup menu item SEtUP-OS),
!he counter is not automatically reset
OFF: No automatic edit poirits
-
rEC: Automatic edit points for recorder only
ALL: Automatic edit points for al 1 VTRs
used in previous edit, except players in DT
editina. If the ~revious edit was an Al6 roll,
point.
GPI OUT POSlTlON
Number of frames by which the actual GPI
output shall be offset from the GPI output
reference point. However, this item is ignored if
the preroll point was chosen as ttie GPI output
reference ooint.
FROM
and TO are exchanged.
m:
Effect start point
rEC in: Recorder IN point
PrEroll in: Preroll point
SEtUP-07
m:
Until end of automatic edit
1FI2FI-..IIOF: Number af frames, range
from 1 to 10
GPI POSI
GPI PULSE WlDTH
GPI pulse width (unit: frames). Choose
SUStAin lo output pulses until !he end of an
automatic edit.
EDlT WITHOUT SERVO-LOCK
Whether or not to abort the edit if servo-lock
On: Abort edit.
-
OFF: Do not abort edil,
EDlT WITHOUT SYNCHRONIZATION
SEtUP-10 Sync Edt
When the SYNCHRO selector is set to ON or
ONICF, whettier or not to abort the edit if
svnchronization at +/-
O
frames fails.
fails.
1
SEtUP-08
SEtUP-09
On: Abort edit.
OFF: Do not aboti edit.
-
GPI PULS
S-LO Edt
, i l
3-1
0
(E)
/
Chaplsr
3
Preparations
Advertisement
Table of Contents
