Table of Contents
Advertisement
You can connect a personal computer or other external equipment to the EDL IN/
OU'I'connector in ordes to download data fiom the EDL to the externa1 device.
You can also upload previously downloaded data from the external device into the
EDL.
Proceed as fbllows to upload
01
download EDL data.
1
Prepare the external equipment for uploading or downloading.
2
Display the current edit number in the EDIT NO./TRANS/DUR display.
3
Press the leftmost of the three EDIT NO.íTRANS/UUR buttons to display
"dnL" (download) or "UPL" (upload).
Each time you press the button, the display changes in the following osder.
I"UPL
c
"dnL
edit nurnber
7
4b
Press the RECALL(ENTRY
+
GO TO) button.
When downloading
The data is output immediately to the extemal device.
During the transmission, the "dnL" display changes to a flashing number
"dXX", where XX represents the number of the edit being transfe~red. When
the download is completed, a warning sound is heard and the display returns to
"dnL".
To stop the transmission, press the ALL STOP button.
Registered edits are downloaded If setup menu item SEtUP-26
(AUTO EDL CLEAR) has been set to On, and if an edit has actually heen
ovenvritten beyond edit 00, then edits are downloaded beginning with the edit
immediately after the new edit (the edit preceded by 'n'), and continuing until
the edit immediately befose the new edit
When uploading
The data is imported into the EDL as soon as you execute the upload fiom the
external equipment.
During the transmission, the "UPL" display changes to a flashing numher
"UXX", where XX represents the numbes of the edit heing transferred. When
the upload is completed, a warning sound is heard and the display returns to
"UPL".
To stop the transmission, press the ALL STOP button
If setup nienu item SEtUP-26 (AUTO EDL CLEAR) has been set to OFF, the
first 100 edits seceived in the transmission are registered in the order 01 to 99,
00. The 1 0 1 s and following edits are ignored.
If setup menu item SEtUP-26 (AUTO EDL CLEAR) has heen set to On, the
first 99 edits received in the transmission are registered in the order 01 to 99.
Tke 100th and following edits are ignored.
m
When an EDL containing deleted or overwritten edits is downloaded and then
uploaded, the edit numbers of the edits in the list are changed. FOI. this reason,
it is no longer possible to reproduce DFS-500 snapshots.
F O I mofe blfonnation abortt riploading and dow~ilonding
EDL
data, contact a Sony
service r.eprere!itative.
7-8
(Fl
i
Chapler 7
Managing Edit Data
-Ths Edit
Oecision List (EOL)
Advertisement
Table of Contents
