Table of Contents
Advertisement
TO
record new time codes on a recorded tape in insert mode
-
Time codes must be recorded continuously on tapes used in time code editing. If
you want to record new time codes on a tape which already contains audio or
visual pmgram materials.
Insert the tape in the xecorder and proceed as follows For this operation, it maltes
no difference whether the edit mode is set to insert os assemble.
l
1
To record new time codes on a recordad tape
in
inseri mode
m
1
Use the setup menu
@rige
.3-8(E)) to set the initial time code. Select setup
-
Bi
menu item SEtUP-27 (abbreviation: tc PrSEt), and rotate the recorder search
m
f;
dial to set the time code.
After setting the time code, do not exit tbe setup menu.
2
Select setup menu item SEtUP-28 (abbreviation: tc droP) to select drop frame
mode os non-drop frame mode.
Do not exit the setup menu.
3
While still in the setup menu, press the EDIT button together with the PLAY
button in the recorder operation control section.
Recording begins with a time code approximately 20 seconds or
60
seconds
(depending upon the setting of setup menu item SEtUP-29) before the initial
time code selected in step 2.
4
70 stop the recording, press the ALL STOP button.
5
After you have finished recording, press the SETUP (ENTRY
+
EDIT) button
to exit the setup menu.
EEt!
If the recorder and player tapes have different formats, and you want to record time
code signals on the player tape in insert mode, temporarily connect the player VTR
to the RECORDER connector. In this case, the player VTR must have a time code
insert function.
Chapler
3
Preparations
3-1 7 (E
Advertisement
Table of Contents
