Table of Contents
Advertisement
Operation mode control section
I
1
Operation mode control cection
@
LEARN button
Press to automatically measure the start delays of
the connected VTRs.
@
PREROLL (preroll time) selector
Set the preroll time to 7 (or 10) seconds, 5 seconds,
or 3 seconds If yoii set this selector to 7 seconds,
the preroll time will be either 7 or 10 seconds,
depending on the setting made using the setup
menu
SYNCHRO (synchronízation) selector
Determines whether or not to synchranize and use
color framing.
ONICF: Synchronizes and uses color framing.
T1iis yields a stable picture, hut editing
precision is slightly lower.
ON: Synchronizes but does not use color framing.
OPF: Does not synchronize.
@
TCIRTCICTL (edit reference) selectors
(for player 1, player
2,
and recorder)
Determine the time counter display format for
player 1 (Pl), player
2
(P2), and the recorder (R)
TC: Displays the recorded time code (absolute
value). The display is not reset even if you
press the RESET button.
RTC: Displays an incremented or decremented
time code after reset (relative value) Reset
when you press the RESET button.
CTL: Displays a CTL pulse count after reset.
Reset when you press the RESET button.
Chapter 2 Names
and
Funcllons
of
f' a ds
2-3
(E)
Advertisement
Table of Contents
