Table of Contents
Advertisement
You can adjust edits aiter iecalling them from the EDL You can also delete edits
froin the EDL, and restore deleted edits by undoing the deletion
5
cave an edit which has been recalled and adjusted (internal
EDL
mode only)
Follow the normal procedures to recall the edit, change it, and register it in the
EDL
For
rnore infori,iatiori, ree "Recalling an Edil" (page 7-6(E)) and "Regirtering a11 Edit"
lpage 7 - X E ) )
To delete an edit from the
EDL
(internal
EDL
mode only)
Recall the edit which you want to delete, then press the CLEAR(ENTRY
+
LAST
EDIT) button
A 'd' appears in front of the displayed edit nurnber
If an edit is preceded by 'd', yoii can follow the normal procedures to recall and
preview the edit. However, it cannot be executed and stored in the EDL again, and
it cannot be downloaded.
To
restore a deleted edit
Recall the edit, then press the LAST EDIT button
The 'd' displayed in front of the edit nurnbe~ disappears.
To clear the
EDL
Press the CLEAR('NTRY
+
LAST EDIT) button together with the ALL STOP
button.
The EDL is initialized and al1 edits are erased.
When the EDL is initialized, al1 ofthe edits which it contains are lost permanently.
They cannot be restored.
When
you
initialize the
EDL
e
In interna1 EDL mode, al1 edits in the EDL are e~ased and the edit numbe~
display changes to "n01".
In externa1 EDL mode, the edit nurnber display changes to "001".
Chapter 7 Managing Edit Data
- The Edit Declsion Llst (EDL)
7
7
E
I p O
Advertisement
Table of Contents
