Selecting From And To Sources; How The From And To Indicators Change - Sony PVE-500 Operating Instructions Manual

Proceed as follows to select the FROM and TO sources,
Selecting FROM and TO sources
1
Press the A/B button
The hutton lights If it is flashing, it stops flashing and lights
The green indicator in the FROM row of the FROM TO section lights
2
Press the P1 or P2 button to select the FROM source.
m
The button lights. At the same time, the r.ed P1 or P2 indicator in the FROM
row lights
e
The green FROM indicator goes out, and the green TO indicator lights.
A drirntion inirst be set i.vhe~i risi~ig mi arcsi1iar)r sorirre (AUX 1,
2, .3)
Forniore inforninriori, see "Using Airxilinry Sorrrees
"
(pnge 6-5(Ej).
3
Select the TO source by pressing the P1
01
P2 button, wliichever is not lit
o
The hutton lights At the same time, the red P1 or P2 indicator in the TO row
Iights
e
The green TO indicator goes out Both of the green indicators are now out
A dtrrntioii lnrlst be set wlieri irring ari n i ~ r i l i n ~ y sorr~re (AUX 1, 2, 3).
For nrore infonnntio~i, see "Usitig Arrxiliary Sorrrres" (pnge 6-S(E)).
How the FROM and TO indicators change
The green FROM and TO indicators change in the following o ~ d e r each time you
press the FROM TO button. The green FROM and TO indicators are never lit at
the same time.
/ a -
FROM indicator lights
E -
TO indicator lights
- F R O M arld TO indicators go out
A
m
Except while you are selecting FROM and TO souIces, make sure that the green
FROM and TO indicato~s are not lit The lighted state means that FROM or TO
souIces can be changed, which can lead to errors
5-4 (E)
1
Chapler
5
Editing wilh Two Players
-
A/B Roll Edils