Using Daily Timer - JVC 0803AIMMDWJEM Instructions Manual

Using Daily Timer

With Daily Timer, you can wake up to your favorite music or
radio program.
• You can set Daily Timer whether the unit is turned on or off
(on standby).
• To correct a mis-entry any time during the setting process,
press CANCEL.
• To exit from the timer setting during the process, press
CLOCK/TIMER repeatedly until the source indication
appears.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then, when
the timer-off time comes, the unit automatically turns off (on
standby).
Daily Timer works every day, and the timer settings remain
stored in memory until you reset them or unplug the AC
power cord.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly
until "DAILY TIMER" appears
on the display.
The (timer) indicator lights up and the
DAILY indicator starts flashing on the display.
• Each time you press the button, the timer changes as
follows:
REC TIMER
Source indicator
(canceled)
2
Press SET.
The source name flashes on the display.
3
Select the source to play back.
1) Press ¢ or 4 repeatedly
to select the source.
• Each time you press the
button, the source changes as
follows:
CD
AM
CLOCK/
TIMER
DAILY
DAILY TIMER
Clock setting
SET
GROUP SKIP GROUP SKIP
MD TAPE
FM AUX
You can also use the source selecting buttons.
When you select "CD"
1. Press SET.
2. Select the disc number by pressing ¢ or 4 (or
DISC UP or DISC DOWN
again.
3. Press ¢ or 4 to select the track number.
If there is no disc on the selected disc tray and if the
selected track is the first track, the first track of next
disc will be selected and starts playback when the on-
time comes.
When you select "MD"
1. Press SET.
2. Press ¢ or 4 to select the track number.
When you select "TAPE," prepare it for playback.
When you select "FM" or "AM"
1. Press SET.
2. Select a preset number by pressing ¢ or 4.
When you select "AUX," set the timer function of the
external component as well.
2) Press SET.
The hour digits of the start time start
flashing.
4
Set the start time.
1) Press ¢ or 4 repeatedly
to adjust the hour.
You can also adjust the hour
using the number buttons.
2) Press SET.
The minute digits start flashing.
3) Press ¢ or 4 repeatedly
to adjust the minute.
You can also adjust the minute
using the number buttons.
Ex.: When you set start time to 7:00.
4) Press SET.
The hour digits of the shut-off time start
flashing.
Continued
), then press SET
SET
GROUP SKIP GROUP SKIP
SET
GROUP SKIP GROUP SKIP
DAILY
SET
56