Using Sleep Timer; Timer Priority - JVC 0803AIMMDWJEM Instructions Manual

Micro component md system
Table of Contents

Advertisement

Using Sleep Timer

With Sleep Timer, you can fall asleep to your favorite music.
• You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP (A.STANDBY)
repeatedly.
The
(timer) and the SLEEP indicators
start flashing on the display.
"SLEEP 10" appears on the display for a while.
• Each time you press the button, the time length changes
as follows:
10
20
Source indication
(canceled)
2
Press SET or wait for about 5
seconds.
(timer) and the SLEEP indicators stop
The
flashing and remain lit.
The display dims automatically.
To check the remaining time until the shut-off time, press
SLEEP once. The remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the time length you want appears.
To cancel the setting, press SLEEP repeatedly until the
(timer) and SLEEP indicators go off from the display.
Sleep Timer will be also canceled in the following cases:
• When you turn off the unit.
• When you operate other timer settings.
• When you adjust the clock.
To sleep with the Sleep Timer and wake up with
the Daily Timer
The unit turns off (on standby) when the shut-off time comes
(set by the Sleep Timer), and turns on when the start time (set
by the Daily Timer) comes.
1 Set the Daily Timer as explained on pages 56 and 57.
2 Start playing back any source you want to listen to
3 Set the Sleep Timer.
SLEEP
A.STANDBY

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Below is the example of timer priority.
SLEEP
A timer with the earlier start time has priority.
If Recording Timer is set to come on while Daily Timer is
operating, Recording Timer will not work.
30
60
120
90
SET
Sleep Timer always has priority.
If Sleep Timer is set to come on while Recording Timer is
operating, Recording Timer will be canceled when the shut-
off time comes.
before sleep.
6:00
Daily Timer
Recording Timer
6:00
Sleep Timer
Recording Timer
Sleep timer and Auto Standby (see page 10) can be used
at the same time.
6:30
7:00
7:30
will not start
6:30
7:00
7:30
canceled
58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents