Ungrouping Tracks-Ungroup; Dissolving All Groups-Ungr All - JVC 0803AIMMDWJEM Instructions Manual

Ungrouping Tracks—UNGROUP
This function allows you to dissolve a group.
You cannot erase the tracks using this function.
Once tracks are ungrouped, the other groups are renumbered.
• To stop any time during the editing process below before
step 6 , press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until "UNGROUP ?"
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated as "– –."
4
Press GROUP SKIP ¢ or GROUP SKIP
4 while holding SHIFT to select the group
you want to dissolve.
SHIFT
Ex.: When group 3 is selected.
GROUP TITLE
/EDIT
SET
GROUP SKIP GROUP SKIP
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step 4 .
6
Press ENTER.
"EDITING" appears on the display. Then
"WRITING" and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
Dissolving All Groups—UNGR ALL
This function allows you to dissolve all the groups.
You cannot erase the tracks using this function.
• To stop any time during the editing process below before
step 4 , press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until "UNGR ALL ?"
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• To cancel the setting, press CANCEL.
4
Press ENTER.
"EDITING" appears on the display. Then
"WRITING" and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
Continued
SET
ENTER
GROUP TITLE
/EDIT
SET
ENTER
44