Moving A Track-Move; Moving A Track (Move) - JVC 0803AIMMDWJEM Instructions Manual

Moving a Track—MOVE
This function allows you to move a track to the position you
prefer. It is useful to change the order of the tracks as you
like.
Once a track is moved, the tracks and/or the groups are
renumbered.
• To stop any time during the editing process below before
step 8 , press TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE/EDIT repeatedly
until "MOVE ?" appears on the
display.
• If the loaded MD has no track, "MOVE ?" will not
appear on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one track, you cannot go to
the following steps.
4
Press ¢ or 4 to select
the track you want to move.
• You can also select the track
using the number buttons. In this
case, the selected track starts playing repeatedly.
Ex.: When track 3 is selected.
49
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
6
Press ¢ or 4 to select
the position where you want
to move the track to.
• You can also select the track
TITLE/EDIT
• If the track selected in this step belongs to a group, the
7
Press SET.
SET
• To cancel the setting, press CANCEL, then repeat from
8
Press ENTER.
"EDITING" appears on the display. Then
"WRITING" and the REC (MD recording)
GROUP SKIP GROUP SKIP
indicator flash while the editing you have
made is being recorded on the MD.
step 4 .
using the number buttons. In this case, the selected track
starts playing repeatedly.
Ex.: When track 3 is moved to track 8.
track selected in step 4 will be entered into the same
group with the current track after moving.
step 4 .
SET
GROUP SKIP GROUP SKIP
SET
ENTER