Playing Back Discs On The 5-Cd Changer; Loading Discs; Playing Back All The Discs-Continuous Play - JVC 0803AIMMDWJEM Instructions Manual

Playing Back Discs on the 5-CD Changer

This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
"finalized."
• Usually you can play back your original CD-Rs or CD-
RWs recorded in audio CD format. However, sometimes
they may not play depending on their characteristics or
recording conditions.
• Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player's lens is dirty.
• CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.

Loading Discs

On the unit ONLY:
1
Press one of the disc eject buttons (CD10 –
CD50) for the disc tray you want to load a
disc onto.
The unit automatically turns on and the selected disc tray
comes out if it is unlocked. See "Prohibiting Disc Ejection
—Disc Lock" on page 19.
CD1 0 CD2 0
• Disc tray is counted from bottom to top. The bottom
tray is disc tray 1 and top tray is disc tray 5.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
15
CD3 0 CD4 0 CD5 0
Good
Not good
3
Press the same disc eject button (CD10 –
CD50) you have pressed in step 1 .
The disc tray closes.
CD1 0 CD2 0
When loading more than one disc at a time
Press the disc eject button (CD10 – CD50) for the next tray you want to
place a disc onto. The first disc tray automatically closes and the next disc
tray comes out.
Playing Back All the Discs
—Continuous Play
You can play discs continuously.
1
Load discs into the 5-CD changer.
• See "Loading Discs" on the left column.
2
Press DISC UP or DISC DOWN
DISC SELECT on the unit) repeatedly to
select the disc you want.
DISC UP
DISC DOWN
(On the remote control)
Playback starts from the first track of the selected disc.
Disc tray number Current track number
C D
1 2 3 4 5
CD indicator and
disc tray indicators
• You can also select a disc and start continuous play while
a source other than "CD" is selected (see page 16).
• You can also select and start playback a desired track of
the selected disc (see "To go to another track" on page
16 and "To go to another track directly using the
number buttons" on page 17).
• Without selecting the disc number, pressing CD 6
starts playing back the currently selected disc.
To stop play for a moment, press CD 6.
While pausing, the elapsed playing time flashes on the display.
• When the key-touch tone is activated (see page 10), the unit
keeps beeping while pausing.
CD3 0 CD4 0 CD5 0
(or
DISC
SELECT
‹ 8
/
CD
(On the unit)
Elapsed playing time