JVC 0803AIMMDWJEM Instructions Manual page 56

You can assign titles during play or recording
• During play:
Entering a track title
The MD recorder repeats playback of the current track until you press
ENTER in step 6 . When you press ENTER, the next track will be
played.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until you
press ENTER in step 6 . When you press ENTER, the MD recorder
enters the track title entry mode.
Entering a group title
The MD recorder repeats playback of the tracks in the group until you
press ENTER in step 6 . When you press ENTER, the MD recorder
enters the next group title entry mode.
• During recording:
Entering a track title
The MD recorder continues recording even after you press ENTER in
step 6 . When you press ENTER, a track title is assigned to the track
where you have started the title entry. If you do not press ENTER
before recording ends, the track title assigned will be canceled.
• During CD-MD or CD Synchronized Recording (see pages 30 and 36):
You can assign the disc title, and 16 track titles one after another as
recording goes on. The track titles you have entered are automatically
assigned to the tracks recorded on the MD in sequential order.
"EDITING" appears on the display for a while, then the next title entry
screen appears. If you enter 17th track title or more, they are ignored.
When you unplug the AC power cord or if a power
failure occurs before step 8
The editing you have made is not recorded on the MD.
Available symbols are as follows:
(Blank)
53
Changing the Title
You can make a correction or change the title.
1
Follow steps 1 to 4 on page 51.
2
Select the character you
want to correct, by pressing
or .
• Make sure that the character you
want to change is flashing.
3
Press CANCEL to delete the
character you have selected in the
above step.
4
Enter the correct character, referring to step
5 on page 52.
5
Repeat steps 2 to 4 of the current procedure
to correct more characters.
6
Press ENTER to finish correcting
the title.
"EDITING" appears on the display for a
while, then the next title entry screen
appears.
• If you want to correct another title, select another title
entry mode by pressing
repeat from step 2 above.
• If you want to finish the correction, go to the next step.
7
Press 0 (MD eject) on the unit
to eject the MD.
"WRITING" and the REC (MD
recording) indicator flash while the
editing you have made is being recorded on the MD.
To erase all the characters, press CANCEL repeatedly in
step 3 above to erase all the characters, then go to step 6 .
10 +10
CANCEL
ENTER
or , press SET, then
0
‹ 8
/
MD